{{ $t('shop.all.spaetbestellservice.hinweis') }}
Permission |
RCM mark, c UL us - Recognized (OL) |
CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU-RoHS Directive |
KC-mark | KC-EMV |
Material information | RoHs compliant |
Measured parameter | Relative pressure |
Measurement process | Piezoresistive pressure sensor with display |
Pressure measurement range starting value [bar] | 0 |
Pressure measurement range end value [bar] | -1 |
Overload range [bar] | 5 |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible |
Medium temperature [°C] | 0 to 50 |
ambient temperature [°C] | 0 to 50 |
Resolution analogue-digital converter [Bit] | 10 |
Accuracy FS [%FS] | 1,5 |
Repeatability in ± %FS [%FS] | 0,3 |
Temperature coefficient in ± %FS/K [%FS/K] | 0,05 |
Control output | PNP/NPN switchable |
Switch function | Freely programmable |
Switching element function |
NC contact, NO contact, Switchable |
Max. output current [mA] | 100 |
display range starting value [%FS] | 0 |
Display range end value [%FS] | 99 |
Short circuit resistance | yes |
Report | IO-Link |
IO-Link, report | Device V 1.1 |
IO-Link, profile | Smart sensor profile |
IO-Link, function classes |
Teach channel, Diagnosis, Identification, Binary data channel (BDC), Process data variables (PDV) |
IO-Link, communication mode | COM2 (38.4 kBaud) |
IO-Link, SIO mode support | yes |
IO-Link, port type | A |
IO-Link, process data width OUT | 0 Bytes |
IO-Link, process data width IN | 2 Bytes |
IO-Link, process data contents IN |
14 bit PDV (pressure measurement), 2 bit BDC (pressure monitoring) |
IO-Link, minimum cycle time | 3 ms |
IO-Link, data memory needed [Byte] | 500 |
Operating voltage range DC [V] | 18 to 30 |
Reverse polarity protection | for all electrical connections |
Electrical connection |
3-wire, cable, Open end |
Cable length [MTR] | 2,5 |
Fastening type | With Accessories |
installation position | arbitrary |
Pneumatic connection | QS-4 |
Product weight [g] | 40 |
Housing material | PA reinforced |
Gasket material | NBR |
Display type |
LED display, 2 digit |
Presentable unit(s) | %FS |
Switching status indicator | LED yellow |
Setting options |
IO-Link, Teach-In, über Display und Tasten |
Tamper-proof fuse | PIN code |
Settings range threshold value [%] | 1 to 98 |
Protection category | IP40 |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
{{ $t('shop.all.gewicht') }} | 40 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 90262020 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.